Xiaomi Portable Electric Air Compressor 2

Xiaomi Portable Electric Air Compressor 2
The 2nd generation air compressor with faster tire inflation
Preset pressure, stops when full
Digital tire pressure detection
Inflation pressure up to 150psi
New generation air compressor with higher performance
Compared with Xiaomi Portable Electric Air Compressor 1S, details are optimized, internal structure redesign, with an approximately 25% faster inflation speed, a significant step forward.
Newly-added electric scooter mode
Newly-added quick connect valve adapter
Approximate 25% increase in inflation speed
Reinflate 10 tires when fully charged
Increase in light brightness
Boosted by up to 25% A faster, better help
With a high-power magnetic motor, the compressor sports a 25% boost in speed. It can fill an empty tire just in 8 minutes*, with powerful inflation performance.
Improved inflation performance Reinflate ten tires when fully charged
Upgraded hardware means improved energy efficiency. When fully charged, reinflate ten tires* continuously or fully inflate two empty tires* continuously, making routine maintenance simple and easy.
High-precision cylinder block Supports up to 150psi
Adopting a 19mm high-precision alloy die-cast cylinder, get inflation pressure up to 150psi. It takes only 86 seconds* to fill a high-pressure bicycle tire.
Preset pressure, stops when full Accurate display of real-time tire pressure
Set the required air pressure value or select a preset mode to inflate in one button. Automatically stop inflation to free you from watching, for greater ease-of-use. The air pressure sensor adopts a digital chip, with tire pressure detection accuracy up to ±1psi*.
Six preset inflation modes Get started easily
Switch six modes in one button and set default air pressure range to avoid over-inflation. The manual mode can remember pressure values. Set it once, and say goodbye to cumbersome settings.
¥ Manual mode
¥ Bicycle mode
¥ Motorcycle mode
¥ Car mode
¥ Electric scooter mode
¥ Ball mode
Newly-added quick connect air valve adapter Quick installation without dirtying your hands
Newly-added quick connect air valve adapter allows you to install the air valve easily and quickly. Abundant accessories for wider-use cases.
Built-in lithium-ion battery Inflate anytime and anywhere
A built-in 2000mAh high-rate lithium-ion battery provides surging power. No need for external power source, go completely wireless.
Lightweight body Greater portability
Weighing only approximately 490g*, it is simple in design and convenient to travel and carry. Slip it in a rucksack, place it in your car or store it at home. It is compact, sleek, and takes up no space.
Type-C universal charging port No worries when going out
Highly compatible Type-C charging port*. Simple, modern charging design means higher convenience.
In-built light
Improved brightness especially for night use.
Inflate from multiple angles
No hassle, charge it anywhere.
Pass-through air duct design
Better air circulation and efficient heat dissipation.
Multiple accessories in one pack
Hidden bag inside for convenient accessories storage.
Air hose on/off switch to prevent accidental use
Pull out to open and plug in to close the air hose.
Four-grid battery-level display
Accurate display of remaining battery level.
Specifications
Product model
MJCQB06QW
Battery type
Lithium-ion battery
Operating temperature
-10¡C to 45¡C
Storage temperature
-10¡C to 45¡C
Noise value during operation
<80dB(A) at 1m distance
Charging port
Type-C
Sensor accuracy
±1psi
Product dimensions
Approx. 123 _ 75.5 _ 45.8mm (device only, excluding air hose)
Air hose dimensions
Air hose length 200mm (Including Schrader valve adapter, excluding the thread end)
Net weight
Approx. 490g
Inflation pressure
0.2Ð10.3bar/3Ð150psi
Charging temperature
5¡C to 40¡C
Rated capacity
2000mAh (14.4Wh)
Rated charging voltage
5V _ 2A
Charging time
Approx. 3 hours
Executive standard
Q/310107QW007
Air valve size (inner diameter)
Schrader valve port _ 6.9mmPresta valve adapter _ 6mmQuick connect valve adapter _ 6.9mm